Reuse
Items still fit for purpose can be redeployed within the same property, moved to another site, or held in storage instead of being discarded.
Furniture Removal, Cleanouts & Disposal
Local removal across the Greater Montreal Area, and coordinated commercial and hospitality removal in major Canadian markets.
- Flat-rate quotes before we start
- Disassembly included where required
- Residential and commercial scopes
- Reuse, donation or recycling where practical
- Floor and doorway protection
Local removal across the Greater Montreal Area, and coordinated commercial and hospitality removal in major Canadian markets.
Furniture removal handled like a move, not a dump run
The same crews, trucks and building protocols that run a move do the removal — which is what makes it work in an occupied condo, a finished office or a hotel corridor.
Most furniture that needs to leave a space is heavy, awkward and surrounded by finishes nobody wants marked. A dresser that has to come down a stairwell, a boardroom table that will not fit through the door it came in through, forty desks that have to clear a floor before the new ones land — these are handling problems before they are disposal problems.
Next Movement approaches removal as a moving operation with a disposition step at the end. Crews arrive with dollies, straps, tools and floor protection, disassemble what needs disassembling, carry it out along a planned route, load it, and then sort what leaves the truck: reuse, donation, recycling or disposal, depending on condition and what the receiving facilities in that market will actually take.
That framing matters commercially too. A removal that is booked alongside a move, a renovation or a furniture installation shares the same access planning, the same elevator booking and often the same crew — which is usually cheaper and always less disruptive than treating it as a separate trade.
What we remove
Furniture and the packaging our own approved scopes generate. If an item is not on this list, ask — it is quoted or declined honestly rather than accepted and left behind on the day.
Couches, sofas and sectionals
Chairs, armchairs and stools
Tables, desks and consoles
Beds and bed frames
Mattresses and box springs, where the receiving facility accepts them
Dressers, wardrobes and nightstands
Shelving and bookcases
Cabinets and storage units
Unwanted furniture before or after a move
Furniture cleared ahead of a renovation
Commercial, office and hospitality
Demolition is not automatically included. Where a scope needs a licensed trade — electrical disconnection, plumbing, structural work — it is identified during review so the right trade is engaged rather than improvised on site.
Workstations, cubicles and panel systems
Office desks, task chairs and filing cabinets
Boardroom and conference furniture
Reception and lounge furniture
Retail fixtures and display furniture
Hotel guest-room FF&E
Model-suite and show-unit furniture
Property-turnover furniture between tenants
Phased removal across floors or areas
Packaging and debris generated by an approved installation scope
What needs separate review, and what we do not take
Being specific here is cheaper for everyone than discovering it on removal day. Two categories: materials we do not handle at all, and materials whose disposal depends on the market and the receiving facility.
Next Movement is not a hazardous-waste contractor and does not represent itself as one. If something in the second list applies to your project, tell us at intake: it is either quoted with the correct disposal route or excluded from scope in writing, so the removal day is not the moment it becomes a problem.
Depends on the market — ask before booking
Mattresses and box springs, which some facilities restrict or surcharge
Appliances, which may need to go to a specific recycling stream
Electrical equipment and electronics, which are often regulated separately
Items with refrigerants or sealed systems
Anything with a manufacturer take-back or stewardship requirement
Very large or fixed items that were installed rather than placed
Remove. Sort. Redirect where practical.
What happens to an item after it leaves the room depends on its condition, on what is available locally, and on what the receiving facility will actually accept that week.
A dining set in good condition and a water-damaged particleboard desk leave the same apartment on the same truck and end up in completely different places. Sorting happens because the alternative — sending everything to the same destination — is both wasteful and, for some material streams, not permitted.
Where an item is reusable and a receiving organization in that market is accepting it, donation or reuse is the preferred route. Where it is not reusable but the material stream is recoverable, recycling is preferred. Where neither applies, it goes to appropriate disposal. That sequence is the intent on every job; the outcome depends on conditions nobody controls from a quote.
Next Movement does not guarantee that any given item will be accepted for donation, does not claim zero-waste or guaranteed landfill diversion, and holds no environmental certification for this service. Where a project needs documented diversion outcomes, say so at intake so the requirement can be assessed against what is actually available in that market.
Where items may go
Donation
Where an organization in that market is accepting the item type and the condition meets their standard, donation can be coordinated. Acceptance is their decision, not ours.
Recycling
Where the material stream is recoverable and a facility accepts it, recyclable material can be directed there rather than to general disposal.
Appropriate disposal
What cannot be reused or recycled goes to disposal through the appropriate facility for that material and market.
Residential removal
Most residential removals are triggered by something else happening — a move, a renovation, a delivery, or a unit that has to be emptied by a date.
Move-out removal
Furniture that is not going to the new place leaves before or on move day, so the truck is not carrying it and the new home does not inherit it.
- Coordinated with the moving date and crew
- Sorted before loading rather than at destination
- Handled on the same access plan as the move
Downsizing and replacement
Old pieces go out when the new ones come in, which usually means one visit rather than two and no period of living around both sets.
- Timed against the new furniture delivery
- Disassembly of pieces that will not clear the door
- Reusable items identified before disposal
Renovation preparation
Rooms are cleared before contractors and installers arrive, so the trade that shows up is not the one moving your furniture into the hallway.
- Whole-room or whole-floor clearing
- Items held in storage where the renovation is temporary
- Protection through finished areas that stay in use
Apartment and condo cleanout
Full unit clearing where a lease ends, a sale closes or a property changes hands, worked within building rules and elevator windows.
- Elevator and loading-dock booking
- Stair carries where no service elevator exists
- Unit left broom-clear for the next occupant
Estate and property cleanout
Discreet, unhurried clearing where a property has to be emptied, with items set aside for family or appraisal before anything is removed.
- Keep, donate and dispose sorted with you present or by list
- Paced over more than one visit where that helps
- Personal contents identified rather than assumed disposable
Commercial and workplace removal
Commercial removal is a scheduling problem as much as a lifting one: the floor has to be clear by a date, the building has rules, and the work usually cannot disrupt whoever is still operating.
Office furniture removal
Workstations, desks, chairs and filing removed by floor or department, with reusable inventory separated from disposal before anything is loaded.
- Panel-system and workstation disassembly
- Reusable versus disposal inventory separated on site
- After-hours and weekend windows where the building requires it
Workplace reconfiguration
Partial removal during a reconfiguration, where some furniture stays, some is relocated within the building, and some leaves entirely.
- Keep, relocate and remove tracked separately
- Internal moves handled in the same visit
- Sequenced so occupied areas stay usable
Commercial relocation and retail turnover
Removal paired with a commercial move or a retail changeover, so the outgoing fixtures leave on the same plan the incoming ones arrive on.
- Coordinated with the relocation schedule
- Fixture and display removal outside trading hours where needed
- Load-out through the service route the building specifies
Phased decommissioning
Multi-floor or multi-area programs cleared in a defined sequence rather than all at once, so each area is released as the schedule allows.
- Area-by-area release with a documented sequence
- Staging to the loading dock between phases
- Progress reported against the agreed schedule
Property-management turnover
Unit and common-area clearing between tenants, sized and quoted per turnover rather than renegotiated every time.
- Repeatable scope across a portfolio
- Predictable turnaround between tenancies
- Building rules and access recorded once
Commercial removal is often quoted alongside commercial moving or FF&E work. Where the same building, dock and elevator are involved, running them as one operation is normally faster and cheaper than two separate mobilizations.
See commercial movingHotel and FF&E decommissioning
Removing existing FF&E before new inventory is received and installed, run as the first phase of the renovation rather than as a separate contract. On a guest-room renovation, the old furniture has to be out before the new furniture can go in, and both movements compete for the same freight elevator, the same dock and the same corridor. Decommissioning is therefore scheduled as part of the FF&E program, floor by floor, against the same room-release sequence the installation follows.
1
Room / area release
The property confirms which rooms or areas are released for work, so crews are never clearing a space that is still in service.
2
Disassembly
Casegoods, beds and fixtures are broken down to what will actually clear the door, the corridor and the elevator.
3
Removal
Contents are carried out along the agreed service route, with corridor, elevator and finished-surface protection in place.
4
Staging
Removed FF&E is staged at the agreed point rather than accumulating in corridors or in rooms scheduled for installation.
5
Load-out
Staged material is loaded out on a schedule that does not collide with inbound deliveries for the new package.
6
Approved disposition
Removed items are directed to reuse, donation, recycling or disposal according to condition, local availability and the disposition instructions agreed for the project.
For defined hotel guest-room scopes, the published FF&E baseline rates apply: decommissioning labour $350 per room, disposal and hauling $170 per room, or $520 per room quoted together. Those rates are for defined hotel-room scopes only and are not a general rate for residential or commercial cleanouts.
See the full FF&E project logisticsPackaging and installation debris
Packaging removal is commonly quoted alongside delivery, assembly or installation work. It is a different thing from construction waste, and the two are kept separate on purpose.
Cartons, crates and pallets from furniture we delivered
Blankets, shrink wrap and protective packaging we applied
Assembly waste from furniture we assembled
Installation packaging from an approved FF&E installation scope
Consolidation and removal at the end of the installation window
General construction waste
Packaging removal is included or quoted in conjunction with furniture installation, FF&E, home delivery and assembly scopes. General construction and demolition waste is a different service with different disposal requirements, and Next Movement does not market it as part of this offering.
Demolition debris
Drywall, framing, flooring and ceiling material
Site waste generated by other trades
Mixed construction bins
Anything requiring a construction waste stream or permit
How removal is priced
Normal furniture removal is quoted flat-rate for the scope, confirmed before any work starts. There is no published per-item or per-truckload rate, because the same couch is a different job on the third floor of a walk-up than beside a loading dock.
A quote is built from what is being removed and what it takes to get it out. Tell us the items, the floor, whether there is an elevator and where a truck can park, and the number that comes back is the number.
Where removal is booked alongside a move, a delivery or an installation, it is normally quoted as part of that project rather than separately, because the access planning and often the crew are shared.
Published per-room FF&E decommissioning and disposal rates apply to defined hotel guest-room scopes only. They are not a general residential or commercial cleanout rate, and no other removal rate is published because it would not be honest to quote one before seeing the scope.
How a removal runs
Seven steps from the first message to a cleared space. Most residential jobs run through all of them in a single visit.
1
Tell us what needs to go
Send the item list, or describe it room by room. Rough is fine at this stage — an approximate count and the largest pieces are enough to start.
2
Review access and items
We check the floor level, elevator or stairs, doorway widths, carrying distance and where a truck can legally stop, plus anything that needs separate disposal review.
3
Confirm the flat-rate quote
You get one number for the agreed scope before anything is booked, along with anything explicitly excluded from it.
4
Remove and disassemble
Crews protect the route, disassemble what will not clear the exit path intact, and carry items out without improvising through finished areas.
5
Load
Items are loaded and, where the job requires it, sorted as they load so reusable pieces are not buried under material heading for disposal.
6
Donate, recycle or dispose where applicable
Loaded material is directed to reuse, donation, recycling or disposal according to condition and what receiving facilities in that market accept.
7
Leave the area ready for the next step
The space is left clear and swept, ready for the contractor, the installer, the new tenant or the new furniture.
Removal usually travels with something else
The most efficient removals are booked as part of the project that created the need in the first place.
Moving?
Remove unwanted furniture before the move
Clearing what is not coming with you means a smaller load, a shorter move and nothing to deal with at the new place.
See residential movingRenovating?
Clear the space before contractors start
Rooms emptied ahead of the trades, so installation starts on schedule instead of starting with furniture in the corridor.
See commercial movingBuying new furniture?
Combine removal with delivery and assembly
Old pieces out and new pieces in, placed and assembled, on the same visit and the same access plan.
See home delivery and assemblyNeed it out but not gone?
Store instead of disposing
Where furniture is being kept through a renovation or a gap between spaces, storage is usually the better answer than removal.
See storage servicesHotel or commercial renovation?
Decommission as part of the FF&E program
Removal of the existing package sequenced against receiving, warehousing and installation of the new one.
See FF&E project logisticsFurniture removal questions, answered
What people normally have to ask by phone before they can decide whether to book.
Do you remove old furniture in Montreal?
Yes. Furniture removal, cleanouts and disposal coordination are offered across the Greater Montreal Area for homes, condos, offices, retail spaces and hospitality properties. Larger commercial and hospitality removal programs can also be coordinated in other major Canadian markets.
Can you remove a couch, a bed or a single large item?
Yes. Single-item removals are common — a sectional that will not fit down the stairwell, a bed frame being replaced, a desk that has to leave before the new one arrives. The quote reflects the access rather than just the item, because a couch on the third floor of a walk-up is a different job than one beside a loading dock.
Do you remove office furniture?
Yes. Workstations, cubicles and panel systems, desks, task chairs, filing cabinets, boardroom furniture, reception and lounge furniture, and retail fixtures. Office removal can be run floor by floor or department by department, with reusable inventory separated from disposal before anything is loaded.
Can you remove furniture during a renovation?
Yes, and it is one of the most common reasons to book. Rooms, floors or whole areas are cleared before contractors and installers arrive, with protection through finished areas that stay in use. Where the furniture is coming back after the renovation, storage is usually the better option than removal.
Can you handle hotel furniture decommissioning?
Yes. Guest-room and common-area FF&E decommissioning runs as a phase of the renovation: room release, disassembly, removal, staging, load-out and approved disposition, sequenced floor by floor against the installation schedule for the incoming package.
Do you disassemble furniture before removing it?
Yes, where disassembly is needed to clear a door, a stairwell or an elevator, or to load safely. Disassembly is part of the quoted scope rather than a surprise charge on the day.
Can usable furniture be donated?
Where an item is genuinely reusable and an organization in that market is accepting that item type in that condition, donation can be coordinated. Acceptance is always the receiving organization’s decision, so donation is never guaranteed in advance. If donation matters for your project, say so at intake and it will be attempted first rather than assumed.
Do you recycle furniture?
Where the material stream is recoverable and a facility in that market accepts it, recyclable material can be directed there rather than to general disposal. Next Movement does not claim zero-waste disposal or guaranteed landfill diversion, and holds no environmental certification for this service.
Do you remove mattresses, appliances or electronics?
These depend on the market and the receiving facility. Mattresses and box springs are restricted or surcharged by some facilities; appliances, electrical equipment and electronics often have to go to a specific recycling stream, and some carry manufacturer take-back requirements. Mention them at intake and they are either quoted with the correct disposal route or excluded from scope in writing.
Do you remove construction debris?
No. General construction and demolition waste — drywall, framing, flooring, ceiling material, mixed construction bins, site waste from other trades — is a different service with different disposal requirements and is not part of this offering. What is included is the packaging and debris generated by our own approved delivery, assembly or installation scope.
Do you take hazardous materials?
No. Hazardous waste, asbestos or suspected asbestos-containing materials, chemicals, solvents, paints, fuels, biohazards, contaminated waste, explosives, pressurized cylinders and regulated dangerous goods are not accepted. Next Movement is not a hazardous-waste contractor and does not represent itself as one.
Can removal be combined with a move?
Yes, and it is usually cheaper that way. Removing what is not coming with you before or on move day means a smaller load, a shorter move and nothing to deal with at the new address. The removal shares the same access planning and often the same crew as the move.
Can removal be combined with new furniture delivery and assembly?
Yes. Old pieces out and new pieces in, placed and assembled, can run on the same visit and the same access plan, which usually means one elevator booking and one disruption instead of two.
How is pricing calculated?
Normal furniture removal is quoted flat-rate for the agreed scope and confirmed before work begins. The number is built from volume and item count, weight and bulk, disassembly required, stairs and elevators, carrying distance, parking and loading access, applicable disposal and recycling fees, crew size, truck requirement and any specialty items. Published per-room FF&E decommissioning and disposal rates apply to defined hotel guest-room scopes only.
Can I send photos of the items?
Not through the form itself — it does not accept attachments. Describe the items in the form, and photos, inventory lists or floor plans can be sent by email once we reply, which is usually enough to firm up a quote without a site visit.
Furniture removal intake
Request a removal quote
The items and the access are what decide the number. Anything you do not know yet can be left blank — we will ask if it matters.
Get a flat-rate removal quote
Send the item list and the access details and you will get one number for the scope, not a range that changes when the crew arrives.